Easy program to sniff and view IP packets (TCP, UDP, ICMP). PacketViewer allows you to view IP packet messages and IP packet informations in real time. You can easily listen on Windows system ports (Eg. Ports 135, 445, 1026-1028). An IP Converter tool allows you to convert IP Addresses to Host Names. The button "Options..." opens the PacketViewer options: Protocol Filter, TCP packets Filter, Addresses IP and Ports Filter...
You can connect data collection serial devices: bar code scanners, modems, sensors, gages, RF equipment, telephone PBX systems, laboratory or industrial instruments, and so on - to the serial ports of your computer to deliver that data anywhere over any TCP/IP based network. Program creates up to 254 virtual serial ports at a time. Physical COM ports located on remote computer can be connected to host computer over the network as well.
Serial Port Splitter allows to share dataflow of one COM port between several applications or vice versa to join dataflow of several COM port devices to one application. Such program universality is achieved by means of virtual serial ports technologies. Moreover Serial Port Splitter allows to setup READ/WRITE or READ ONLY mode for splitted ports and READ/WRITE or WRITE ONLY mode for joined serial ports.
With Serial Port Splitter you can easily split one real serial port into several virtual ones, join several real ports into one virtual or create a bundle with real, virtual and shared ports with the possibility to interconnect them. From now you can even share one real port between several applications, grant access rights to the certain application and set serial port connection parameters.
COM Port Splitter allows you to split one real port into several virtual ones, join several real ports into one virtual and redirect the serial traffic from real port to another one, which can be real or virtual. More than that, you can share one real serial port between several applications so that all applications will receive same data from one serial port simultaneously.
Using a standard Windows PC, Multi Server Simulator can simulate large, virtual HTTP, FTP, SMTP, or DNS server networks, as well as SNMP-based network switches. With Multi Server Simulator, setting up a large network of 100 servers and 20 switches (with thousands of ports) takes just minutes and is much faster than having to install and configure server software on a PC.
ZylGPSReceiver is a Delphi/CBuilder component that communicates with a serial GPS receiver. This component works with any NMEA compatible receiver connected to one of the serial ports. You can use it also with USB and Bloototh devices, because these devices usually have a driver that redirects the input from the USB port to a virtual serial port. With this component you will be able to develop robust GPS Delphi or CBuilder applications.
"professional Look at Net" is a portable network monitoring tools - net scanner, ports scanner and packets sniffer. Portable features (run on flash-drive) possible only registered version. The Network scanning don't required network administrator privilege, only host administrator right require for silent scanning and Ethernet frames or IP packets capturing. IP packets filtering on IP addresses, ports, outgoings, incomings and more.
IP Sharkk is a top notch IP change tool.. Redirect any traffic with IP Sharkk, http, https, pop3, instant messengers or any other ports of your choice. Wide choice of fresh IPs from all over the world with super fast connections. This software allows you to feel truly anonymous on the Internet. It's impossible to detect that you are using IPSharkk and that makes your IP address truly secure, so if you wsih to hide your ip, this is the choice
AutoScan-Network is an application designed to explore and to manage your network. Entire subnets can be scanned simultaneously without human intervention. The objective of the program is to post the list of all equipment connected to the network. A list of ports preset is scanned for each equipment.
